The Malthouse blog

Twitter Flickr YouTube Google Maps E-mail RSS
Home Archive for category "Facilities"
formats

FAQ – Where are you based?

Published on February 8, 2012 by in Facilities, Featured Post, Frequently Asked Questions

Over a normal week we talk to  a lot of customers, one thing we noticed was that we had similar questions coming up. So we thought to make it easier for you to find the information your looking for we would put together a series of the frequently asked questions (FAQs) on our blog. This week its where are we based. Malthouse Engineering is the largest steel profilier in the UK. Over the years we have expanded from our base in Oldbury to 4 other locations. These are   Our head office is in Oldbury MALTHOUSE ENGINEERING, EMPYRIUM PROFILERS, MIDLAND STEEL PROFILES

(Read More)……

 
 Share on Facebook Share on Twitter Share on Reddit Share on LinkedIn
No Comments  comments 
formats

FAQ – What Lumsden grinding facilities do you have?

Published on January 5, 2012 by in Facilities, Frequently Asked Questions

Within Malthouse Engineering we have one of the largest rotary Lumsden Grinders in the UK capable of Grinding up to 126″ Diameter. In total we have 12 rotary Lumsden Grinders across the group with a further 3 Reciprocating Lumsden Grinders capable of working on material up to and including 192″ (4877mm) x 26.25″ (667mm) with overhang.   We can get our tolorences down to an accuracy of +/- 1mm to 3mm depending on thickness. With unspecified dimensions we can grind to +/- 0.25mm (10 thou) and with specified dimensions we can grind to +/- 0.12mm (5 thou)    

 
Tags: , ,
 Share on Facebook Share on Twitter Share on Reddit Share on LinkedIn
No Comments  comments 
formats

Are you looking for Lumsden Grinding up to 3200mm?

Published on December 22, 2011 by in Facilities, Malthouse Engineering Videos

At Malthouse Engineerings Oldbury site we have one of the UKs largest rotary Lumsden Grinders capable of grinding up to 3200mm.   We also offer reciprocating grinding up to 4800mm. Watch the video below to see our grinders in action and get in touch for further details either by going to our Lumsden Grinding section on our site or by calling 0121 557 8455.  

 
Tags: ,
 Share on Facebook Share on Twitter Share on Reddit Share on LinkedIn
No Comments  comments 
formats

Undergear Engineering

Published on December 6, 2011 by in CNC Machining, Facilities

Undergear Engineering are part of the Malthouse Group. Based in West Bromich, they can provide both horizontal and vertical machining in addition to turning. This short clip shows one of their machines in action. For more go to www.UndergearEngineering.com  

 
Tags: ,
 Share on Facebook Share on Twitter Share on Reddit Share on LinkedIn
No Comments  comments 
© Copyright Malthouse Engineering
credit